How To Fix Sharp Carousel Microwave Door Latch

Are you lot having some problems with your Sharp microwave door? If this is so, y'all have come to the correct identify. We are going to show you how to ready a Sharp microwave door latch and other related problems.

How to a Prepare Sharp Microwave Door Latch

To ready the door latch in a Sharp microwave, follow the steps listed beneath…

Step 1: Commencement, turn off the microwave.

Step 2: Open up the microwave door.

Step 3: Using a putty pocketknife or a flathead screwdriver, pry out the frame effectually the door.

Stride 4: If part of the spring which holds the door latch has broken off, you volition need a pair of pliers.

Step 5: Using the pliers, bend the tip of the bound and claw information technology back upwardly.

Step 6: Realign the door frame and snap information technology into identify.

Step 7: Plow the microwave back on.

The video below volition walk you through how to fix a Abrupt microwave door latch.

How to Replace a Sharp Microwave Door Switch

To supervene upon a Sharp microwave door switch, do the following…

Step ane: Plow off and unplug the microwave from the outlet.

Stride ii: Take out the screws at the dorsum of the microwave then elevator the cover out.

Step 3: Take out the screw at the top of the door switch holder.

Pace four: Take out the other screw at the bottom.

Step 5: Bring the door switch holder out so that you tin proceeds access to the switches.

Pace 6: To make up one's mind which door switch is faulty, press the button on each one. If there is a strong click when you do this, the door switch is okay. However, if the push on one of the door switches feels loose, you will need to replace it.

Step 7: Have the faulty door switch out and disconnect the wires.

Stride viii: Get a new door switch and connect the wires to the right terminals.

Step 9: Identify the door switch dorsum in the holder.

Footstep 10: Realign the door switch holder and hold it in place at the top and bottom with the screws.

Step 11: Reposition the microwave cover and secure information technology with the screws.

Footstep 12: Plug the microwave in and test it out.

Watch the video beneath if you would similar a visual showing y'all how to replace the door switch in a Sharp microwave.

Sharp Microwave Door Stuck

If your Precipitous microwave door is stuck, you will need to replace the door latch bracket. To do this, follow these steps…

Step 1: Plow off and unplug the microwave.

Step 2: Accept out all the screws which concord the microwave cover in place. There will be a couple of screws at the dorsum.

Step 3: Remove the microwave cover.

Pace 4: Remove the door latch bracket.

Step 5: Get a new door latch subclass and install it.

Step 6: Reposition the microwave cover and hold it in place with the screws.

Step vii: Plug the microwave back in.

Beneath is a video which will show you how to supersede the door latch bracket in a Abrupt microwave.

Sharp Microwave Door Fogging Up

Information technology is normal for condensation to form on your Sharp microwave door. This happens when you cook food with a high water content. To prevent this from happening, encompass your plates with microwave condom lids when cooking. After cooking wipe the door of the microwave with a soft cloth or get out the door open for about xv minutes.

Check out these manufactures…

Maytag Microwave Lite [How To/Issues & Solutions]

Whirlpool Microwave Light [Issues & Solutions]

Whirlpool Microwave is Not Working [How to Fix]

Whirlpool Microwave Door [How To/Issues & Solutions]

Whirlpool Microwave Turntable [How To/Bug & Solutions]

How to Clean a Whirlpool Microwave [Like shooting fish in a barrel Guide]

Whirlpool Microwave is Making Dissonance [Issues & Solutions]